Difference Between Mid Tower Vs Full Tower PC Case [Definitive Guide]

Full Tower Vs Mid Tower

While buying a PC case, it is often a matter of great confusion whether which PC case will accommodate the motherboard, cables, wire loops, and other PC components splendidly.

Not only a box for your PC, but a PC case selection is also primarily based on many factors to consider like the size of the motherboard, a roomy internal, supporting GPU, good in managing air cooling and water cooling, better ventilation, tempered glass design, and some lights and RGBs will serve as icing on the cake.

Another widely used term you may come across is Mid Tower vs Full Tower PC case. To clear your understanding about the difference between full tower vs mid tower PC case, we have some thoughts to share with you to make your easy purchase.

Comparison Table

Full TowerMid Tower
Motherboard SupportE-ATX, EEB, HPTXMicro ATX, ATX
Fans Support10-126-7
PCI-E Slots7-107-8
Water CoolingYesNo
Air FlowNot Very EfficientExcellent
Additional HardwareBetter For Extended HardwareLimited
Cable ManagementExcellentGood
Productive ForExecutives, administration, gaming enthusiast, home servers, and video editingCasual gamers, office work

Difference Between Mid Tower Vs Full Tower

To enclose all the basic information along with some major points of differentiation, we will try to let you make a valid informed decision about which PC case you intend to put your money into. Here you go!

Full Tower PC Case:

A full tower PC case is bigger and wider than all the PC case types and is ideal for gaming enthusiasts, executives, and administrators. The size of the Full Tower PC case, though big enough with exclusive ventilation and cooling, but keep in mind that you may risk some of the hotspots inside the case that may not be accessible to the fans.

While talking about the size, a full tower pc case ranges in size from 20 to 30 cm in width, 60 to 90cm in height, and has a capacity of accommodating 10 to 15 drive slots internally and externally.

While considering the motherboard support, a full tower pc case can support ATX, E ATX, while holding multiple graphics cards, and other PC components. The full tower pc case is best for gaming and compulsive gamers to exhibit their high performance with adequate RAM, and two CPUs with better sound beats.

Pros of Full Tower PC Case:

  • Full tower PC cases are considered best for air cooling and water cooling as compared to mid-tower PC cases. A full tower pc case has a larger capacity for a greater number of fans that prevents your PC from heating up even if you are at a higher overclocking speed.
  • There is enough internal space for the cables and wires that are explicitly placed within the full tower PC case, so if any malfunctioning is detected in the cables, you can easily trace their origin for fixation. This thing is highly beneficial as it prevents you from disassembling the entire component.
  • Full tower pc cases are highly rated for their spacious interior for a number of hard drives and drive bays. So if you are planning for the extension and diversification of your PC components, a full tower PC case will never disappoint you.
  • The best use of a full tower case is in gaming, it supports a greater number of video cards as compared to the mid-tower pc case in which you need to flex the video cards due to lack of enough space. Experts guarantee the full tower PC case for scalable link interface support or gaming CAD.
  • Full tower PC cases are not only best in air cooling but they are also efficient in water cooling; in fact, these are a better hybrid of air and water cooling. Moreover, liquid cooling is way more effective than air cooling.

Cons Of Full Tower PC Case:

  • The very first thing that we do not favor in a full tower PC case is its weight. Yes! It is too heavy for the user who intends to move his computer frequently from place to place.
  • Being bulky and large in size, we do not recommend a full tower PC case to the users who are already lagging in enough space to place it.
  • Though there are many fans for cooling and ventilation, due to its large size, there might remain some hotspots deprived of cool air and thus may heat up the system.
  • Not a very budget-friendly option for those who are not in a position to spend enough of the budget. A full tower PC case is expensive as compared to a Mid-tower PC case.

Mid Tower PC Case

While viewing from the consumer’s point of view, a mid tower PC case is the most go for computer case. Although the size is smaller in contrast to a full tower pc case, a mid tower pc case still has a large capacity to support graphics cards and a number of hard drives.

As far as the support of the motherboard is concerned, the mid tower case is capable of supporting ATX and Micro ATX configuration.

Almost all the best mid tower computer case sizes are 15-20 cm in width and 43-45 cm in height. The number of fans and expansion slots are definitely lesser than the full tower atx case but still sufficient enough. The internal space is also smaller but can accommodate the cables in a fine way.

The best mid tower case is capable enough for encasing 2 or 3 GPUs, around 6-8 expansion bays, and sufficient room for housing 2-3 motherboards.
Meanwhile, mid tower computer cases are in significant demand by the occasional, casual users, low budget gamers, and office users.

Pros Of Mid Tower PC Case:

  • A mid-tower pc case is a perfect option for those who are looking for better performance in a compact size. It is smaller than the full tower pc case but larger than the mini pc case. Thus, it can be carried and moved easily.
  • As already mentioned, a mid-tower pc case can accommodate 2 -3 GPU’s and almost 6 PCI slots can better handle any latest game of the century.
  • The size of the mid-tower computer case is well balanced, all the zones are easily accessed by the fans for cooling and ventilation. It will not let you be guilty of any hotspot inside the case.

Cons Of Mid Tower PC Case:

  • In such a compact size pc case, if any cable is found broken or any malfunctioning is detected, you will find yourself in a bit of trouble. It will make you disintegrate some of the pc components to get access towards the desired point.
  • A mid-tower computer case can easily heat up with 3 graphics cards despite a better cooling system. This means it does not have greater efficiency at a higher overclocking speed.

When To Buy a Full Tower PC Case?

Those consumers who aim at:

  • The desire for multiple motherboards supports and with a support of 3 or 4 GPU’s.
  • Require support for a number of hard drives
  • Customization of modes or designs
  • Customized water loops
  • Convenience and performance at the same time with this PC case

When To Buy a Mid Tower PC Case?

Those consumers who aim at:

  • Configuration 1 or 2 GPU’s with ATX motherboards
  • Who are tight on budget or are casual Desktop users
  • Have restricted available space for play this PC case
  • Are focusing more on airflow and ventilation

Best Full Tower PC Case Reviews: Our Top Picks

Best ATX Full Tower Case

Corsair Obsidian Series 1000D

  • Dimensions: 27.3×12.1×27.4 inches
  • Motherboard Support: ATX, E ATX, and mini ITX
  • Max Graphic Card Length: 400mm
  • Max Cooler Height: 180mm
  • Cooling Fans Support: 13 fans of 120/140mm
  • Additional Features: 60 Pounds in weight, Full Tower PC Case RGB, Tempered Glass
  • Radiator Options: 2x480mm radiators at the front, 1×420 radiator at the top

Unlike other eatx full tower cases designed for expert builders, Corsair 1000d atx full tower case can be used by anyone who wants to accommodate 2 desktops in a single case with lots of space for other components of the PC. Indeed, this is the best full tower case for gaming and streaming.

Considering the features of this model of corsair full tower case, it is integrated with 2 roomy and sufficient space for your pc systems and features an integrated commander pro fan and RGB lighting controller.

Corsair full tower is equipped with an iconic and neat exterior brushed in black color aluminum with tempered glass panels. Moreover, the tempered glass panels are put together magnetically and can be removed for opening and closing to get access to filters. The design is extremely eye-catching and recognizable among other full tower pc cases.

Another positive thing about Corsair 100d full tower pc case is that it can be configured easily. There are sufficient USB ports for the efficient performance of the two systems. While supporting E ATX, mini ATX, and ATX motherboards, Corsair’s full tower case has multiple options for cooling.

The front panel features 8 fans of 120mm, 3 fans of 140mm on the top, and 2 fans of 120/140mm on the back, totaling up to 13 fans. There are 2x480mm radiators at the front and 1x420mm at the top. However, the corsair full tower case claims that it has the capacity for 4 x480mm radiators that you may buy separately.

Built with smart lighting and fan control, you will find a pre-installed commander pro at the bottom of this PC case. Commander pro is a fan and RGB lighting controller that converts your pc case into a smarter one. It utilizes ICUE software for this full tower RGB customization, manages the speed of the fans, and monitors precise temperature.

All in one, two motherboards support, 2 power supplies, multiple USB ports, a rotatable GPU bracket for vertical mounting of GPU… thus Corsair 1000d is the perfect full size gaming pc case.


  • Super tower glass tempered PC case
  • Spacious internal for 2 motherboards
  • Efficient in performance
  • Better cable looping and arrangement
  • Air and water cooling amalgam
  • RGB controller and temperature monitors
  • Triple chambered design
  • Enough space for extended hardware
  • ICUE enabled


  • Heavy
  • Expensive
  • Fans sold separately

Best E-ATX Full Tower Case

Cooler Master Cosmos C700P

  • Dimensions: 12.05×25.16×25.63 inches
  • Motherboard Support: ATX, E ATX, Mini ITX, and Micro ITX
  • Max Graphic Card Length: 490mm
  • Max Cooler Height: 198mm
  • Cooling Fans Support: 9 fans of 120/140mm on the top, front, rear, and back
  • Additional Features: 21.6 kg in weight, Full Tower PC Case with water cooling system, Curved Tempered Glass Panel
  • Radiator Options: Top: 120mm, 140mm, 240mm, 280mm, 360mm Front: 120mm, 140mm 240mm, 280mm, 360mm, 420mm Rear: 120mm, 140mm Bottom: 120mm, 140mm, 240mm

Integrated with the exclusive design of Cosmos C700P, the Cooler Master full tower case features a very flexible and expandable layout with handles at the top. This expandable layout enables you to add additional components to your PC and even customize the layout of this full tower case according to the cooling needs.

As a full tower desktop case, Cooler Master Cosmos C700P emerges as the best full tower E-Atx case while it can also support Atx, mini itx, and micro itx motherboards. This pc case has enough space to accommodate multiple drivers and cards while beautifully looping the cables without creating any mess or bends in wires.

Moreover, there is an extensive cable cover system that prevents the small sensitive cables in place while preventing them from being pressed or coiling irregularly. The cable system can also mount SSD storage or a reservoir.

This Cooler Master case full tower is a full tempered glass pc case with a versatile layout having a unique rear panel that can mount graphics cards and motherboards vertically and a loophole for the passage of cables and wires safely.

Another attribute of this desktop full tower case is the flat radiator brackets. This system of radiators offers enormous liquid cooling with convenient maintenance, mounting, and removal to keep your hardware safe.

The connectivity to E-Atx is way simple as this desktop full tower case has a number of USB ports including USB 3.1, Type C, and 4×3.0 USB ports. The speed of the fan is entirely under your control with a button provided while RGB lighting can also be monitored and controlled via an RGB controller. You can synchronize RGB lighting with your desired motherboard.


  • Highly flexible and versatile layout
  • Aluminum handles for easy movement
  • Sleek and curved tempered glass
  • Built-in RGB lighting
  • Multiple connectivity slots
  • Extensive and spacious
  • Better cable covering
  • Excellent water cooling
  • Removable motherboard tray


  • Does not include motherboard washers and screws, you have to buy it separately

Best RGB Case

Thermaltake View 71

  • Dimensions: 23.31×10.79×22.72 inches
  • Motherboard Support: ATX, E ATX, Mini ITX, and Micro ITX
  • Max Graphic Card Length: 310 mm( with HDD rack) 410mm (without HDD rack)
  • Max Cooler Height: 190mm
  • Cooling Fans Support: 3 x120mm or 2 x140mm fans at the front, and 3 x120mm or 140mm at the top, 2 at the bottom, and 1 at rear
  • Additional Features: 21.6 kg in weight, Full Tower PC Case with water cooling system, Curved Tempered Glass Panel
  • Radiator Options: 3 radiators of 360/420mm, 1x 120/140mm at the rear end, and 1x240mm at the bottom

Thermaltake has indeed pushed the boundaries beyond the mark in achieving a versatile layout and chassis design. Scrolling among the best full tower pc cases, you will find Thermaltake View 71 that emerges as the best full tower case for water cooling and ventilation. Let’s dig into the specs in detail.

Thermaltake View 71 is integrated with tempered glass panels 5mm in thickness that inculcates an overall strength and durability to the chassis. Sliding the panels on either side will allow the users to view the beautifully arranged pc components.

The chassis design is highly expendable and modular; it allows the DIY users to cherish the ultimate building of the system from brackets, panels, and pre-designed mounting arrays without any difficulty in accessing the screws and corners.

While talking about the spacious internal and expandability of Thermaltake View 71, it features motherboard support for ATX and Eatx and accommodates PSUs of 220mm in length. The expanded graphics card support allows this full tower case to boost the processor’s overclocking capacity without heating up to get the best from the hardware.

The main attraction of this budget full tower case is the dual GPU support riser bracket, which prevents the graphics card from sagging and hanging but also minimizes the load on the motherboard. Supporting up to 10HDDs, the HDD cage design with its spacious capacity incorporates the best level of liquid cooling without compromising the length of the GPU.

Connectivity to any motherboard won’t be a problem with Thermaltake View 71. It features a number of connectivity ports including USB 3.0 ports. The tool-free drive bay designs remove the hassles of installation and also offer to interchange the 2.5” and 3.5” storage drives.

With a built-in design of 3x140mm, RGB LED fans, heat dissipation, and ventilation have become efficient with advanced management of airflow in and out.
Thermaltake View 71 RGB edition is equipped with sufficient space for the installation of water cooling radiators. This full tower pc case has the capacity to accommodate 3x420mm radiators and up to 360mm all-in-one liquid coolers. The case layout offers convenient drainage of the coolant without turning the pc for evacuation.


  • Glass tempered panels with sliding door design
  • Durable and strong
  • Versatile expandability
  • Riser GPU support bracket
  • Best water cooling and ventilation
  • RGB LED fans
  • Tool-free installation


  • PCI-E X16 Riser Cable sold separately

Best Mid Tower PC Case Reviews: Our Top Picks

Best ATX Mid Tower Case


  • Dimensions: 22×11.5×22 inches
  • Motherboard Support: ATX, E ATX
  • Max Graphic Card Length: 384mm
  • Max Cooler Height: 176mm
  • Cooling Fans Support: 8 fans of 120mm
  • Additional Features: 24.46lbs in weight, tempered glass panels, honeycomb vent design for advanced ventilation and cooling
  • Radiator Options: 1×360/280/240mm, 1x240mm

Designed for beginners as well as experienced builders, Lian Li Lancool 2 is integrated with a toolless design with high-end features in air cooling and ventilation. This Atx mid-tower case is equipped with water tanks on the top, front, and bottom. Precise ventilation is maintained via a vent located near the graphics card.

Considering the air cooling system, there are removable brackets that allow the consumers to install up to 3 fans of 120mm, 2 fans of 140mm, or a radiator to bring better water cooling. The internal panel also accommodates 2 120mm fans to bring cooling to the PSU.

The mid-size Atx case is made up of tempered glass panels on both sides that along with RGB lighting will let the consumers enjoy pc components visibility. The magnetic panels are molded in a hinge design for easy and rapid assembling.

Lain Li full tower case offers ATX, Eatx, and micro ATX motherboard support. It features a diverse space for expansion with 7 large-sized expansion ports and inculcates a drive cage that can easily mount 3 drives of 2.5 inches.

A CPU cooler of 176mm height, an ATX or E-Atx Cpu, and a 384mm long graphics card can also be incorporated in this mid-tower Atx case. There is an advanced cable cover system with cover plates that organizes your cables and messy wires you don’t want to expose.


  • Spacious internal
  • Good cables management
  • Customized cooling
  • Maximum airflow
  • Dust filtration
  • Expandible room


  • Can’t Have Extra Pins and Fans

White Mid Tower Case

Corsair 4000D

  • Dimensions: 17.83×9.06×18.35 inches
  • Motherboard Support: ATX, E ATX, ITX
  • Max Graphic Card Length: 360 mm
  • Max Cooler Height: 170 mm
  • Cooling Fans Support: 3 fans of 120mm/ 2x140mm in the front, 2×120/140mm at the top, 1x120mm at the rear end
  • Additional Features: 17.2lbs in weight, glass tempered mid-tower case designed for efficient performance.
  • Radiator Options: 1x280mm at the roof, 1x360mm at the front

Integrated with the front panel layout in a triangle configuration, Corsair 4000d has an eye-catching design with the best airflow, to prevent your desktop and other components from heating up with intense use. Not holding a very high price tag, but Corsair 4000d is still better than other mid-tower pc cases above 100$.

Apart from the affordability in price and durability of design, this mid-tower case features some perforated zones that are meant to boost ventilation and heat dissipation.

This mid-tower case is not RGB, but it fits perfectly in ATX, Eatx motherboards. Besides, it has also sufficient room for accommodation of graphics card, CPU, air coolers, and radiators. 2x120mm Corsair Airguide fans are pre-installed to bring about better ventilation.

Definitely, a pc case is worth purchasing if it is non-compromising in airflow. Corsair 4000d has a well-equipped front panel consisting of 3x120mm fans while allowing the consumers to add on extra fans if required.

Corsair rapid route cable management makes it simple and fast to loop and routes your major cables without being twisted through a single channel with 25mm of space behind the motherboard for all cables.

Talking about the drive bays, it has a capacity of 360mm graphics card and two SATA SSD. Corsair 4000d also features a number of connectivity ports including a USB 3.1 Type C port, USB 3.0 port, and a combo of audio/mic jack.


  • Durable and sturdy design
  • Better airflow and ventilation
  • Tempered glass design
  • Good cable management
  • Sufficient internal space
  • Good budget mid tower pc case


  • Difficulty in removing the side panels

Best Budget PC Case

Phanteks Eclipse P350X

  • Dimensions: 17.91×7.87×17.72 inches
  • Motherboard Support: ATX, uATX, mITX, E ATX
  • Max Graphic Card Length: 380 mm
  • Max Cooler Height: 160 mm
  • Cooling Fans Support: 2 fans of 120mm/ 2x140mm in the front, 2x120mm and 2x140mm at the top, 1x120mm at the rear end
  • Additional Features: 14.1 lbs compact with RGB illumination modes, tempered glass design.
  • Radiator Options: 1x240mm and 1x280mm at the front, 1x120mm at the rear end

If you really want to buy a budget pc case, Phanteks Eclipse P350X is there for you. Phanteks P350X is positioned somewhere between P300 and P400 with some additional high-end features at a very affordable price.

Putting extra work to upgrade the design and features of Phanteks P350X, you will find an eye-catching side panel of tempered glass and D-RGB lighting control. As clear from the mentioned dimensions, it is a compact Atx mid-tower case that has the capacity to house mini ITX, micro ITX, and somewhat Eatx motherboard systems.

The main feature of attraction in this Atx mid-tower case is the D-RGB LED light strip that runs all over the length of the pc case. This digital RGB control allows you to customize the best selection of colors and sync it with your motherboard using an integrated D-RGB adapter.

Offering high airflow performance, liquid cooling support, and vast space for hard drive support, Phanteks Eclipse P350 is all set for high-end presentation.
Besides better airflow and water cooling, this mid-tower pc case 2021 has fully magnetic dust filters that help in purifying and filtration the dust from accessing internal PC components. The internal is vast enough to support an SSD graphics card, and a full-size PSU support. There are 3 mounting zones for SSD and 2×3.5” HDDs mounting points.

Considering the connectivity, Phankets P350X offers 2xUSB 3.0 ports for convenient connection with the motherboard.

Read Also: Silent PC Case Guide


  • Tempered glass design
  • Digital RGB illumination modes that are not over bright
  • Accommodates full-size GPU and PSU
  • Good cable management design
  • Budget friendly


  • No reset button
  • Basement can get crowded with 3.5” HDD

Tempered Glass PC Case

Fractal Design Meshify C

  • Dimensions: 16.1×8.54×17.72 inches
  • Motherboard Support: ATX
  • Max Graphic Card Length: 315mm
  • Max Cooler Height: 170mm
  • Cooling Fans Support: 3 fans of 120mm or 2 fans of 140mm at the front, 2×120/140mm at the top, 1×120 rear, and 1×120 at the bottom
  • Additional Features: Compact mid-tower pc case with high-performance airflow and air cooling.
  • Radiator Options: 120/240/360mm radiator at the front, 120/240mm radiator at the top

With a striking aggressive pose of Meshify, Fractal Design emerges as the smallest mid-tower case with unparalleled cooling performance. Compact yet roomy and spacious layout, Fractal Design Meshify C offers an unrestricted airflow so that heat never becomes a problem for your pc components.

Fractal Design Meshify C is a compact design with a large number of hard drive supports like a full tower pc case, with 7 fans mounted at the front, top, and bottom and numerous radiators to bring the best of liquid cooling out of it. The advanced angular mesh design also boosts air intake.

Exclusive air cooling is also assisted by the pre-installed 2x Fractal Design Dynamic X2 GP-12 fans that offer minimum noise and have a larger life expectancy of 100,000 hours. The dust is also filtered via dust filters mounted on the top, front, and base with full PSU coverage.

Having room for 5 drives in total and 3 SSD cards, this small mid-tower case has flexible storage for mounting and arranging the essential cables as well without overloading the basement.


  • Durable design
  • Easy to clean filters
  • Good air cooling and water cooling system
  • Ample storage
  • Vibration damping
  • A large hardware support


  • Difficult to remove the front panel
What To Choose? Full Tower Or Mid Tower PC Case: Our Verdict

While puzzled between the selection of full tower vs mid-tower pc case, the very important step is to first identify the compatibility option with your motherboard. For casual and gaming purposes, a mid-tower pc case is just doing fine. It occupies minimum space while boosting the performance up to your desired level.

On the contrary, if you are looking for an enormous space with an efficient water cooling system to protect the hardware, then a full tower pc case is the best option for you. It has sufficient connectivity slots and hardware slots including AMD 4 graphics.

So if you are trying to accommodate multiple PCs in a case, with better cable management, advanced ventilation, and air cooling, exclusive water cooling design, and enough budget to spend, then a full tower pc case otherwise a mid-tower pc case is well for your routine use.

  1. What is the difference between a full tower and mid tower pc case?

    The major difference between a full tower and a mid-tower pc case is the size. A mid-tower pc case measures 15-20cm in width and 43-4cm in height whereas a full tower pc case is 20-30cm in width and 60-90cm in height. Besides size, a mid-tower pc case has a lesser number of fans, connectivity ports, and has small motherboard support as compared to the full tower pc case. However, air cooling is efficient in mid-tower pc cases.

  2. What is the best full tower case in 2021?

    The best and exclusive full tower PC case in 2021 is Corsair 1000d. While if you are a fan of tempered glass layout, then Thermaltake View 71 is the product for you. If you are looking for an RGB full tower case, then Cooler Master Cosmos C700P is best for you.

  3. How to tell if you have a full size pc case?

    If your pc case can accommodate an ATX motherboard with 7 ports of connectivity, then it can be a mid-tower or full-tower pc case. A mini-tower pc case can only support a micro ATX motherboard.

  4. What is the best full ATX pc case?

    The best full ATX PC case is Corsair 1000d. While if you are a fan of tempered glass layout, then Thermaltake View 71 is the product for you. If you are looking for an RGB full tower case, then Cooler Master Cosmos C700P is best for you.

  5. What is the best full tower pc case for gaming?

    Cougar panzer max ATX full tower case is the best full tower pc case for gaming.

  6. What is ATX mid tower case?

    As already mentioned that a full tower and a mid tower pc case can support ATX motherboard. ATX mid tower case is widely used with ATX configurations and dimensions for efficiency and standardization of performance.